Reviewcompared exists to make your life easier by helping you buy the right selection of products.

How To Reset The KitchenAid Dishwasher?

Dishwashers from KitchenAid can be reset by the simple process of rebooting. The method to reboot depends on the issue you’re experiencing to do with the KitchenAid dishwasher. This article will discuss three reset procedures that can make your device work again in only a few minutes. Before this, you should determine the reason why the dishwasher isn’t functioning correctly or is not functioning in any way. Try the below method to reset your Kitchen Aid Dishwasher before calling someone to fix it.

What Are The Reasons To Reset A KitchenAid Dishwasher?

If you experience any issues with the operation of your KitchenAid dishwasher then you should start the process of rebooting it. The main issues with dishwashers could be due to any or more of these.

1. The light of Clean-Complete keeps blinking constantly.

2. The current cycle is stuck. I.e. there isn’t any progress in the running cycle.

3. Power supply interruption to the dishwasher

4. Dishwasher is completely dysfunctional that could result in the inability to respond at all inputs.

The reason for this is that the dishwasher is not functioning properly in various parts in the dishwasher. The problem could be within your circuit breaker, the computer in the control panel or fuse, the main control board, etc. Sometimes, the issue can be restricted to the current cycle.

The efficacy of the repair and reset procedure will be determined by the root cause of the issue.

What Are The Ways Of Rebooting A KitchenAid Dishwasher?

If you experience any issue regarding your dishwasher you are able to fix it by using any of the three mentioned rebooting procedures. The decision will be based on the issue that is affecting the KitchenAid dishwasher. Let’s go over the steps in more depth.

1. Basic Reboot

The most simple and basic method of restarting your dishwasher is turning off the appliance in order to wipe the memory on the computer’s control panel. It is possible to perform a basic reboot using two methods.

  • The first option is to turn off your circuit breaker which powers your dishwasher, and then waiting some time. After a few minutes, turn the circuit breaker on again. We suggest waiting five minutes to allow the reboot to take effect.
  • The second option involves disconnecting it from the socket on your wall, and waiting for a bit before returning it to. We recommend that you wait a time of about five minutes for the memory within the panel control to clean up.

Additionally, in certain situations there are times when the reason behind dishwashers not working is due to the circuit breaker not being turned on. When you reset your dishwasher ensure that the circuit breaker is set to the off position.

2. Reset The Cycle.

Resetting a cycle is most likely, the fastest method to restart the dishwasher. If you’re having issues during the process of advancing You can opt to restart the process. This can be done by pressing just one button. The only thing you have for you to restart the cycle inside the KitchenAid dishwasher is long-press the cancel or the cancel drain switch. This will end the current cycle, and then reset the cycle’s progress. You can now begin the next cycle according to your requirements. If the issue persists, proceed to the next phase.

3. Reset The Control Panel Program.

In the event that the two methods mentioned above failed to bring your dishwater back to normal function. It is recommended for you to restart the processor on the control panel of your dishwasher.

The procedure for the majority of KitchenAid dishwashers is identical but there are some slight differences between models.

Before beginning the process of setting the control panel’s program Make sure that the door to the dishwasher is shut, and that you do not close it throughout the entire procedure.

In order to reset your control panel you will need push two buttons consecutively in order to press them one after the other. Follow this pattern that involves pressing 2 buttons five times. This is that you have to do a total of 10 buttons.

On some models it is necessary to repeat the cycle just four times. We recommend you complete five times because it is effective on the majority of KitchenAid dishwashers.

The alternate buttons to press are Hi-Temp, HiTemp Wash button or Hi-Temp Scrub and they must be followed by the Heated Dry button, Air Dry button or energy saver dry button.

Make sure you press the buttons according to the model you have. After each button press you’ll notice the lights above the buttons will blink or become activated. Also, you will observe the device reacting to these pressings. For instance the drain pump might be activated or there may be other modifications. Do not be worried and do not interfere in the process. The dishwasher is self-diagnosing and assessing its own.

The whole procedure will take about a couple of minutes. Once the process is complete with a total of 10 buttons, press the cancel or cancel-drain button. This will initiate the draining process. This is the final step in the process of reset. After a couple of minutes and the drain process is complete it is possible to begin the new cycle according to your requirements.

These are the most common ways of solving problems. But, this isn’t all-encompassing list. There may be other issues that your dishwasher is having that could cause any of the mentioned processes to be successful.

The Solution Above Can Be Summarized With A Simple Table.

Reset MethodProblem Rectified.
1)Basic ResetPower, interruption, issue with circuit Breaker
Reset the cycleIssue with current cycle There is no progress in cycle
Reset the control panel’s program.Issue with the computer in the control panel.

What If None Of The Above-Mentioned Processes Work?

The process mentioned above will be successful if there’s any issue with the control panel’s computer system or current cycle, or circuit breakers. These are the most frequent problems in kitchenaid dishwasher. KitchenAid dishwasher. But, they’re not the only issues. The issue could be caused by the computer board, control panels or a blowing fuse. You can take off the door to gain an access point to the panel as well as fuse. But, you’ll need the knowledge and experience required to perform this repairs. If you don’t have the prior experience, it is best to hire an expert repairman.


Here are a few ways to tackle an issue or malfunction with Your KitchenAid dishwasher.

If the product you purchased is within warranty, bring it to the closest service center to have repairs. At any time you may feel lost or stuck, it’s recommended to speak to an expert for repair. In addition, if any of you find that the three methods discussed above fail, ensure that you call an expert to take care of the repair.